6/19/2016 7:22 PM | 8 Comments



Fall protection and safety is a major concern on construction sites. Whether it’s repairing a roof, building a new home, or constructing the next skyscraper in Boston, there are many ways in which workers can become injured. Safety precautions and procedures need to be established to safeguard the lives of your workers — especially when it comes to fall safety.


According to the Occupational Safety & Health Administration, 20.5% of the 4,251 worker fatalities in the private sector in 2014 were in construction, and falls are the leading cause of death in construction.


Falls from ladders, scaffolds, roofs, and other elevated workspaces are preventable. Learn how you can prevent these accidents and protect your workers with our 5 safety tips:


Provide the Proper Equipment 

Hard hats, protective eyeglasses, safety-toed footwear, and gloves are personal protective equipment that your workers should wear at all times while on the job.


Equipment, such as ladders, that your workers will be using on a daily basis should be safe and up to code. Falls from ladders are all too common on construction sites and can be prevented with the proper inspections and safety practices. Your employees should take the following precautions when using a ladder: 


  • Inspect ladders for cracked, broken, or defective parts prior to each use.

  • Safely position portable ladders so the side rails extend at least three feet above the landing.

  • Secure side rails of the ladder at the top to a sturdy support and use a grab device when three-foot extension is not possible.

  • When carrying tools, carry them in a belt or consider raising them with a rope.  

  • Never use the top three rungs, or top two steps of the ladder.

  • Have another employee on the ground who can monitor the ladder and worker.


Provide a Safe Work Space + Create a Safety Plan

Consider this scenario: Your workers are building a new home and putting the shingles on the roof. Their power cords and tools are being used in the process. One of the workers is walking across the roof, slips on a cord, and tumbles to the edge of the roof. Instead of a fatal fall happening, the worker is saved by the safety harness and lanyard that he is wearing.


By making it mandatory for workers to wear a safety harness, you can promote a safe workspace and prevent fatal injuries. Almost all sites have unprotected openings, sides and edges, or floor holes at some point during construction. If these sides and openings are not protected, injuries from falls or falling objects may result.


Use at least one of the following whenever you are exposed to a fall of six feet or more above a lower level:

  • Guardrail systems

  • Safety net systems

  • Fall arrest systems


A full, fall prevention and safety plan should be created and implemented before any construction begins on your projects. Your plan should comply with the OSHA law and regulations which you can learn more about here.

Train Your Employees

Falls and falling objects usually result from unstable working surfaces that are not securely positioned. 


By training your employees on how to properly use their tools, equipment, and machinery, you will help decrease the risk of injuries. It is also important to train them on the various safety requirements and procedures as included in your safety plan.  Audio and visual presentations can be given to educate employees on the importance of fall protection and procedures. In addition, weekly toolbox meetings with management and workers can be scheduled to keep training and communication ongoing about these safety practices. Communication is key to fall prevention!


Inspect Construction Site Every Day  

Before the workday begins, the site manager or other qualified personnel should inspect all machines, tools, and protective equipment at the construction site. Extension cords, drop cords, and electrical tools should be checked and properly grounded.


Check scaffoldings and ladders as well to make sure they are secure to climb and use by your workers. Before workers begin their day, examine their personal protection equipment to ensure that it is properly secured, especially if they will be working at high distances.


Clean Up Site Everyday at End of Day

A clean space is a safe space. Cleaning should be an integral duty of your workers and management team. Work areas should be clean and hazard-free at all times and a clean-up of the entire site should happen at the end of each day.

This will help prevent any unexpected accidents due to negligence. For example, if someone falls over debris left around the construction site and is injured, you may be liable to cover costs associated with the injury. Luckily, general liability insurance covers this “Bodily Injury to Others.”

At Eastern Insurance, the safety of you and your workers is our top priority. We hope that these tips will help you create a safe and hazard-free environment in order to reduce the rates of fall-related injuries in the construction industry.


Learn more about our contractor insurance and our general liability insurance by giving us a call at: 800-333-7234 or visiting our website.


Comments

Got something to say? Join the discussion ยป
  1. Tobias's avatar Tobias
    I really like the advice to make sure you've got the proper equipment. I've heard of people getting injured at a work site simply because they had the wrong footwear on. So the tip to put on safety-toed footwear may seem superfluous to some readers, but to me it's very valid. Thanks for taking the time to help prevent workplace accidents! http://brandworx.com.au/categories/foot-wear/safety
    Reply 7/6/2016 8:30 AM
  2. Zequek Estrada's avatar Zequek Estrada
    I like the tip about making sure the site is clean at the end of the day. Cleaning is part of good maintenance, and I've heard that basic maintenance tends to prevent most problems from occurring. Another thing that could be done to help implement these tips would be to hire outside help and see how safe they think the job site is. http://www.acrewsafety.com/
    Reply 8/3/2016 6:26 PM
  3. Jalu Sakti's avatar Jalu Sakti
    I think it's a really good idea to know the limits of whatever equipment you are using, like you said. If a lift can only carry 330 pounds, then don't put 400 pounds of weight on there. It's such a simple idea, but if it's overlooked, it could create a real hazard to the workplace. I also really like what you talked about with using correct safety materials like hard hats and goggles. Things like that are very understated. I will keep this in mind whenever I am at construction sites.
    http://www.northernmetalicsalesdc.com/en/northern_safety_and_welding.html
    Reply 9/16/2016 4:21 PM
  4. Trackforce's avatar Trackforce
    Construction owner has to ensure the safety of workers and the workers who works in an isolated location without any kind of supervision. It is very important to make sure that you are providing suitable security equipment like security mobile devices, radio devices to your workers so that they can inform the management about the emergencies in real time.
    Reply 10/24/2016 9:56 PM
  5. Trackforce's avatar Trackforce
    Construction owner has to ensure the safety of workers and the workers who works in an isolated location without any kind of supervision. It is very important to make sure that you are providing suitable security equipment like security mobile devices, radio devices to your workers so that they can inform the management about the emergencies in real time.
    Reply 10/24/2016 9:56 PM
  6. John Mahoney's avatar John Mahoney
    I agree that when it comes to construction it is better to be safe than sorry. I understand how making sure you hire a company that is concerned about safety can help you save money on hospital bills. It makes sense that a company who makes sure the job is done right and that their employees have the right safety training can be a great asset to have. http://www.whitehornconstruction.com/index_sub.html
    Reply 1/5/2017 1:55 PM
  7. John Mahoney's avatar John Mahoney
    I agree that when it comes to construction it is better to be safe than sorry. I understand how making sure you hire a company that is concerned about safety can help you save money on hospital bills. It makes sense that a company who makes sure the job is done right and that their employees have the right safety training can be a great asset to have. http://www.whitehornconstruction.com/index_sub.html
    Reply 1/5/2017 1:56 PM
  8. Yilliang's avatar Yilliang
    Thanks for the great advice regarding construction equipment rentals. I have been contemplating whether to rent or to buy my equipment. I think that renting would probably be more cost efficient in all situations so I will probably do that. Thanks for the information! http://www.laxequipmentrental.com/equipment-sales-n-rental
    Reply 3/9/2017 4:22 PM

Leave a Reply

 [Quick Submit with Ctrl+Enter]

Remember my details
Notify me of followup comments via e-mail